Pinnacle™ Concrete Finish
• Is a new generation; versatile, water-based acrylic polymer based topical finish developed for light to moderate industrial concrete environments.
• Is a maintainable cost effective alternative for facilities that do not require heavy duty industrial strength coatings.
• Offers excellent protection against water and chemical attack and is stain resistant, with low VOC emissions without foul odor and extended cure time.
• Is a high solids coating for use in moderate industrial and institutional areas that require long wear with excellent abrasion resistance when used with a maintenance coat.
Directions For Use
Note: Pinnacle™ Concrete Finish may be applied as a clear coat or colorized with standard acrylic/water-based colorants. To attain depth and richness of color, two or more applications may be required.
Although Pinnacle™ Concrete Finish can be used as a stand alone product, best results are achieved by applying one or two coats of Reinforce™ Concrete Seal as a base coat. This is especially important when using colorization.
Pinnacle™ Concrete Finish can be applied with brush, airless sprayer, T-bar applicator or roller. If two coats are required apply second coat when first coat is completely dry (usually one hour, recommend 2 hours).
Pinnacle™ Concrete Finish is specifically designed to accept acrylic colorant dispersions for topical colorization.
When Pinnacle™ Concrete Finish is used in conjunction with Infusion™ Penetrating Hardener, it exhibits exceptional gloss retention.
Many colors are available, ask your distributor for pallet sheet.
Click on link below to download a pdf document for complete Technical specifications and usage.
Download Pinnacle Concrete Finish [pdf - ]
Download Pinnacle Concrete Finish MSDS [doc - 54k]