Reinforce™ Concrete Seal




Product Description
• Is a unique new generation, versatile, water-based hybrid acrylic/epoxy polymer based seal.

• Is recommended for medium duty maintenance yet offers PUD like chemical resistance with low voc and excellent economy.

• Features non-whitening film properties and excellent gloss retention.

• Benefits: corrosion resistance, QUV gloss and color retention, extremely high water resistance, room temperature film formation, detergent resistance and efflorescence resistance.

Directions For Use
Note: The floor must be clean to allow seal to penetrate. This gives the most performance and longevity to the sealer. Penetration will depend on the porosity of the concrete.

Reinforce™ Concrete Seal is applied as a clear coat. For best results; slightly wet concrete before applying Reinforce™ Concrete Seal.

Application
Reinforce™ Concrete Seal can be applied with brush, airless sprayer, padco type applicator or roller. Apply moderate to heavy coat (contingent on porosity of concrete) allowing product to penetrate into concrete. Go over the area again to ensure penetration and even out application. If two coats are required apply second coat when first coat is dry (usually two hours).

If colorization is desired, use Pinnacle™ Concrete Finish which colorized with standard acrylic/water based colorants. A multitude of colors are available, ask your distributor for pallet sheet.

Technical Specifications
Click on link below to download a pdf document for complete Technical specifications and usage.

Download PDF
Download Reinforce™ Concrete Seal [pdf - 24]

MSDS Documentation
Download Reinforce™ Concrete Seal MSDS [doc - 54k]