Eradicate Concentrated Floor Finish

Product Description
• Is a professional strength concentrated floor stripper designed for removing difficult or built up floor finish.
• Dissolves multiple coats of floor seal/finish for ease of removal
• Is a super concentrate that can be used at multiple dilution ratios to accommodate even the toughest finish build up.

Directions For Use
Note: before handling or using, read and understand label and current material safety data sheet for this product.   

Preparation
Remove objects that may impede service and dust mop area to remove dry soil.  Mix Eradicate Concentrated Floor Stripper in accordance with manufacturers recommended dilution ratios.  Adjust dilution rationas needed to address finish build-up condition. 

Application
Eradicate may be applied with mop and bucket, or solution applicator.  Never put Eradicte in solution tank of automatic scrubbing machine. 

Apply liberal amount of diluted solution to desired cleaning area.  Allow to dwell for an appropriate time (usually 10-15 minutes).  Agitate solution with rotary floor machine or automatic scrubbing machine and appropriate stripping pads and/or brushes.  Evacuate contaminated solution with wet vacuum.  Rinse the floor with clean water and detail edges, corners and baseboards.  Rinse the floor thoroughly with clean water.  Inspect floor, if floor finish is still visible, repeat process.  

After floor is completely dry, apply multiple coats of Fusion Floor Seal/Finish to achieve desired appearance level.  Apply one coat of Infusion Penetrating Hardener and burnish to high gloss.  

Technical Specifications
Click on link below to download a pdf document for complete Technical specifications and usage.

Download PDF
Download Eradicate Concentrated Floor Stripper [pdf - 1.93 MB]

MSDS Documentation
Download Eradicate Concentrated Floor Stripper MSDS [doc - 54k]